- DAT2061 Temperature Transmitter
The Isolated RTD converter DAT2061 is a DIN Rail mount isolated temperature converter with DIP Switch programmability.
The DAT2061 is accurate to 0.1% full scale and has less than 0.02%/°f thermal drift.
It is possible to set the coarse range and zero with the DIP switches. Use the potentiometers to fine tune the output whilst keeping within the minimum and maximum ranges shown in the table on the data sheet. The potentiometers are located on top of the DAT2061
The DAT2061 accepts both 2 wires and 3 wire RTD's.
The DAT2061 is isolated between the power supply and the input/output to 2000V and eliminates the effects of any ground loops and allows the use of the transmitter in heavy environmental conditions found in industrial applications.
The DAT2061 is in compliance with the standard 89/336/CEE on the Electromagnetic Compatibility.
The DAT2061 is housed in a plastic enclosure of 12.5 mm thickness suitable for DIN rail mounting in compliance with EN-50022 and EN-50035 standards.
Current 4-20mA, 0-20mA.
Power Supply Voltage 18-30Vdc
Reverse polarity protection 60Vdc
DIP Switch Programmable.
2000 Vac Between Input/Output/Power Supply.
For Industrial environments
Immunity EN 61000-6-2
Emission EN 6100-6-4
Dimensions W X H
3 1/2" x 4 1/2" x 1/2"
90 x 112x x 12.5 mm
Weight 3 oz 90 g
Operating Temperature -4°F +140°F -20°C +60°C
Storage Temperature -40°F +185°F-40°C +85°C
Humidity (non condensing) 0-90%