null
Datexel

Isolated converter DC current signal with fixed input - DAT5023 IDC-B

(No reviews yet) Write a Review
SKU:
DAT 5023IDC-B
Weight:
170.00 Grams
  • Datexel Isolated converter DC current signal with fixed input - DAT5023 IDC-B
  • Isolated converter DC current signal with fixed input - DAT5023 IDC-B

Description

Datexel Isolated converter DC current signal with fixed input - DAT5023 IDC-B

Analog Output, Isolated power supply source, Highly Accurate – made in Italy

The converter DAT 5023Idc is designed to convert the DC current signal from 0÷5 A to 0÷60 A applied on its input in a voltage or current output signal.

The device is available in three versions (A, B and D) in function of the input current value (refer to “Technical specification” section).

The user can program the output ranges by the proper DIP-switches available after opening the suitable door located on the side of device (see “Output ranges table” sections).

The regulation of Zero and Span values is made by the ZERO and SPAN potentiometers located on the top of device.

The 2000 Vac isolation between power supply and output eliminates the effects of all ground loops eventually existing and allows the use of the converter in heavy environmental conditions found in industrial applications.

The measure of the input signal is executed by a cross connector and a Hall effect transducer; this allows to isolate the input side from the output and power supply.

The DAT 5023Idc provides on the output side an auxiliary supply source to connect both active and passive loads.

It has been made in compliance with the 2004/108/EC on the Electromagnetic Compatibility.

It is housed in a plastic enclosure of 27.5 mm thickness suitable for DIN rail mounting in according to EN-50022 and EN-50035 standards.

The advantages and features for Datexel Isolated converter DAT5023 IDC-B:

  • Input for DC current signal
  • Build-in pluggable cross connector
  • Measure by Hall effect transducer
  • Isolated power supply source for passive loads on output
  • Voltage or current output configurable by DIP-switches
  • Galvanic isolation at 2000 Vac
  • Good accuracy and performance stability
  • EMC compliant – CE mark
  • DIN rail mounting in compliance with EN-50022 and EN-50035

 

Input for Datexel Isolated converter DAT5023 IDC-B

  • 0÷5 A, 0÷10 A, 0÷20 A, 0÷25 A, 0÷30 A, 0÷40 A, 0÷50 A, 0÷60 A
  • Type of measure Direct: Cross connector Diameter: 8 mm

 

Output

For Datexel Isolated converter DAT5023 IDC-B is as listed below:

  • Signal type (configurable) Current: 4 ÷ 20 mA, 0 ÷ 20 mA,
  • Voltage: 0÷10 V, 2÷10 V, 0÷5 V, 1÷5 V
  • Zero regulation ± 40 % max.
  • Span regulation ± 40 % max.
  • Load resistance (Rload) Current output: </= 500 W, Voltage output: >/= 5 KW
  • Auxiliary supply (Vaux) 12 Vdc min @ 20 mA

Performances

  • Calibration error ± 0.1 % of f.s.
  • Linearity error (*) ± 1 % of f.s
  • Thermal drift 0.02 % of f.s./°C
  • Response time (from 10 to 90 % of f.s.) 400 ms
  • Power supply voltage (**) 18÷30 Vdc
  • Current consumption (***) Current output: 90 mA max.
  • Voltage output: 60 mA max.
  • Electromagnetic Compatibility (EMC)
  • (for industrial environments) Immunity: EN 61000-6-2; Emission: EN 61000-6-4
  • Isolation voltage 2000 Vac, 50 Hz, 1 min.
  • Operating temperature -20 ÷ 60 °C
  • Storage temperature - 40 ÷ 85 °C
  • Relative humidity (non cond.) 0 ÷ 90%
  • Weight approx. 170

 

Series Information

“P.D.S. SERIES”: temperature and signal transmitters The P.D.S. (programmable by dip-switches) series transmitters and converters

can accept on their input signals coming from 2 or 3 wires Pt100. Thermocouple and Strain Gauge sensors or Voltage and Current signals.

  • Single and double channel 4÷20 mA two wires transmitters for Pt100 input without galvanic isolation (DAT2065, DAT2066)
  • 4÷20 mA two wires transmitter for Thermocouple input without galvanic isolation (DAT2045)
  • Single and double channel converters for Pt100 input with configurable output as voltage or current without galvanic isolation (DAT2165, DAT2166)
  • Isolated converter for Pt100 input with configurable output as voltage or current (DAT2061)
  • Converter for Thermocouple input with configurable output as voltage or current without galvanic isolation (DAT2145)
  • Isolated signal converters with configurable input and output as voltage or current (DAT5020. DAT5021, DAT5023I, DAT5023V)
  • Isolated signal splitter with configurable input and output as voltage or current (DAT5022)
  • Isolated signal converter for Strain Gauge input with configurable output as voltage or current (DAT5025) and converters for DIN rail mounting

 

About Datexel:

Founded in 1992 from the commitment and aspiration of several partners as a small provincial company, through the years DATEXEL has become an established reality on Italian and international markets as a manufacturer of electronic equipment for industrial automation and control process.

The range of DATEXEL products includes: Transmitters, signal and temperature Converters (both analogue and digital), galvanic Isolators, signal Splitters, I/O Modules, Trip Amplifiers, Power Supply Units, current loop Isolators, analogue and digital Displays.

Documents

To View Data Sheet for Datexel Isolated converter DC current signal with fixed input - DAT5023 IDC-B Please Click Here
View AllClose

Warranty Information

One Year Warranty
View AllClose

Additional Information

Input:
Current 0-20 Amp, 0-25 Amp, 0-30 Amp
Output:
Voltage 0-10V, 0-5V, 2-10V, 1-5V
Current 4-20mA, 0-20mA:
NaN
Power Supply:
18 to 32 Vdc. Reverse polarity protection 60 Vdc
Current Consumption:
Current output 35 mA max. Voltage output 25 mA max
Temperature rating:
Operative -4°F +158°F -20°C +70°C Temperature Storage Temperature -40°F +185°F -40°C +85°C
Humidity:
(non condensing) 0-90%
Housing:
Material self-extinguishing
Dimensions:
3 1/2" x 4 1/2 " x 1/2", 90 x 112x x 12.5 mm
Weight:
3 oz 90 g
EMC:
For industrial environments. Immunity: EN 61000-6-2. Emission: EN 61000-6-4
Configuration:
PC Configurable and DIP Switch Configurable
View AllClose