null
Datexel

DIN Rail Signal Converter Voltage and Current Input, Voltage and Current Output - DAT 5021

(No reviews yet) Write a Review
SKU:
DAT5021
MPN:
DAT5021
Weight:
90.00 Grams
Minimum Purchase:
1 unit

Description

Datexel 3 way isolated signal converter - DAT5021

Voltage/current input and output, High accuracy and performance, Italian made

 

The DAT5021 converter is made to output a voltage or current signal whose value is proportional to the normalized signal applied to its input. After opening the appropriate door, which is positioned on the side of the device, the user can configure the input and output ranges using the appropriate DIP-switches.

The ZERO and SPAN potentiometers on the device's top control the values for Zero and Span.

The Datexel converter can be used in harsh environmental circumstances seen in industrial applications because of the 2000V isolation between the input, power supply, and output, which avoids the impact of any ground loops that may eventually emerge.

The DAT5021 offers an additional supply source for connecting active and passive current loops on the input side. Additionally, it offers an auxiliary supply source on the output side to connect both active and passive loads.

This temperature transmitter is encased in a plastic enclosure that is 12.5 mm thickness and appropriate for DIN rail mounting in accordance with EN-50022 and EN-50035 requirements. It was built in accordance with Directive 2004/108/EC on the Electromagnetic Compatibility.

The advantages for Signal Converter DAT5021:

  • Input for voltage and current signal
  • Input range configurable by DIP-switches
  • Isolated power supply source for passive current transmitter on input
  • Isolated power supply source for passive loads on output
  • Voltage or current output configurable by DIP-switches
  • Galvanic isolation at 2000V between input, power supply and output
  • Good accuracy and performance stability
  • EMC compliant – CE mark
  • DIN rail mounting in compliance with EN-50022 and EN-50035
  • 3 way Isolated signal

Input for Signal Converter DAT5021 is:

  • Signal type (configurable) Current: 4-20 mA, 0-20 mA
  • Voltage: 0-10 V, 2-10 V, 0-5 V, 1-5 V
  • Input impedance Voltage: >/= 1 MΩ, Current: ~ 50 Ω
  • Auxiliary supply (Aux. supply) 18 Vdc min @ 20 mA

Output for Signal Converter DAT5021 is as follows:

  • Signal type (configurable) Current: 4-20 mA, 0-20 mA,
  • Voltage: 0-10 V, 2-10 V, 0-5 V, 1-5 V
  • Zero regulation ± 5 % min.
  • Span regulation ± 5 % min.
  • Load resistance (Rload) Current output: </= 500 Ω, Voltage output: >/= 5 KΩ
  • Auxiliary supply (Aux. Supply out) 12 Vdc min @ 20 mA

Performances

  • Calibration error ± 0.1 % of f.s.
  • Linearity error (*) ± 0.05 % of f.s.
  • Thermal drift 0.02 % of f.s./°C
  • Response time (from 10 to 90 % of f.s.) < 10 ms
  • Power supply voltage (**) 18-32 Vdc
  • Current consumption (***) Current output: 90 mA max.
  • Voltage output: 60 mA max.
  • Electromagnetic Compatibility (EMC)(for industrial environments) Immunity: EN 61000-6-2; Emission: EN 61000-6-4
  • Isolation voltage 2000 Vac, 50 Hz, 1 min.
  • Operating temperature -20-60 °C
  • Storage temperature - 40-85 °C
  • Relative humidity (not cond.) 0-90%
  • Weight approx. 90 g

Industries/applications

  • Furnace
  • Oil and gas
  • Brick manufacturing
  • Heat Exchangers
  • Industrial Processes
  • Heating/cooling systems

Series Information

"P.D.S. SERIES": temperature and signal transmitters and converters for DIN rail mounting

The P.D.S. (programmable by dip-switches) series transmitters and converters can accept on their input signals coming from 2 or 3 wires Pt100. Thermocouple and Strain Gauge sensors or Voltage and Current signals.

  • Single and double channel 4-20 mA two wires transmitters for Pt100 input without galvanic isolation (DAT2065, DAT2066)
  • 4-20 mA two wires transmitter for Thermocouple input without galvanic isolation (DAT2045)
  • Single and double channel converters for Pt100 input with configurable output as voltage or current without galvanic isolation (DAT2165, DAT2166)
  • Isolated converter for Pt100 input with configurable output as voltage or current (DAT2061)
  • Converter for Thermocouple input with configurable output as voltage or current without galvanic isolation (DAT2145)
  • Isolated signal converters with configurable input and output as voltage or current (DAT5020. DAT5021, DAT5023I, DAT5023V)
  • Isolated signal splitter with configurable input and output as voltage or current (DAT5022)
  • Isolated signal converter for Strain Gauge input with configurable output as voltage or current (DAT5025)

About Datexel

Founded in 1992 from the commitment and aspiration of several partners as a small provincial company, through the years DATEXEL has become an established reality on Italian and international markets as a manufacturer of electronic equipment for industrial automation and control process.

The range of DATEXEL products includes: Transmitters, signal and temperature Converters (both analogue and digital), galvanic Isolators, signal Splitters, I/O Modules, Trip Amplifiers, Power Supply Units, current loop Isolators, analogue and digital Displays.

Documents

You may want to read this product's catalog. If so, please click to view the DAT5021 datasheet.
View AllClose

Warranty Information

One Year Warranty.
View AllClose

Additional Information

Input signal type (configurable):
Current: 4 ÷ 20 mA, 0 ÷ 20 mA, Voltage: 0÷10 V, 2÷10 V, 0÷5 V, 1÷5 V.
Input impedance (auxiliary supply):
Voltage: >/= 1 MΩ, Current: ~ 50 Ω. 18 Vdc min @ 20 mA.
Output signal type configuration:
Current: 4 ÷ 20 mA, 0 ÷ 20 mA, Voltage: 0÷10 V, 2÷10 V, 0÷5 V, 1÷5 V.
Zero regulation:
± 5 % min.
Span regulation:
± 5 % min.
Load Resistor.nce:
Current output: /= 5 KΩ.
Auxiliary supply (Aux. Supply out):
12 Vdc min @ 20 mA.
Calibration error:
± 0.1 % of f.s.
Linearity error (*):
± 0.05 % of f.s.
Thermal drift:
0.02 % of f.s./°C.
Response time (from 10 to 90 % of f.s.):
< 10 ms.
Power supply voltage (**):
18÷32 Vdc.
Current consumption(***):
Current output: 90 mA max.
Electromagnetic Compatibility (EMC) ( for industrial environments ):
Immunity: EN 61000-6-2; Emission : EN 61000-6-4.
Isolation voltage:
2000 Vac, 50 Hz, 1 min.
Operating temperature:
-20 ÷ 60 °C.
Storage temperature:
- 40 ÷ 85 °C.
Relative humidity (not cond.):
0 ÷ 90%.
Weight approx.:
90 g.l
View AllClose