null
Datexel

RTD and Thermocouple Temperature Transmitter - DAT1075

(No reviews yet) Write a Review
SKU:
DAT1075
MPN:
DAT1075
Weight:
20.00 Grams
Minimum Purchase:
1 unit

Description

Datexel RTD and Thermocouple Temperature Transmitter DAT1075

Highly Accurate, Current Output, Italian made

The transmitter DAT 1075 is able to execute many functions such as: measure and linearisation of the temperature characteristic of RTDs sensors, conversion of a linear resistance variation, conversion of a voltage signal even coming from a potentiometer connected on its input.

The measured values are converted in a 4÷20 mA current signal. Moreover, the DAT 1075 is able to measure and linearise the standard thermocouples with internal cold junction compensation. The device guarantees high accuracy and performances stability both in time and in temperature.

The programming of the DAT 1075 is made by a Personal Computer using the software PROSOFT, developed by DATEXEL, that runs under the operative system "WindowsTM ". By use of PROSOFT, it is possible to configure the transmitter to interface it with the most used sensors.

In case of sensors with a no-standard output characteristic, it is possible to execute, via software, a "Custom" linearisation (per step) to obtain an output linearised signal.
For Resistance and RTDs sensors it is possible to program the cable compensation with 3 wires; for Thermocouples it is possible to program the Cold Junction Compensation (CJC) as internal or external.

It is possible to set the minimum and maximum values of input and output ranges in any point of the scale, keeping the minimum span shown in the table below.
Moreover, it is available the option of alarm for signal interruption (burn-out) that allows to set the output value as high or low out of scale.

The DAT 1075 is in compliance with the standard 89/336/CEE on the Electromagnetic Compatibility.
It is housed in a self-extinguish plastic enclosure suitable for DIN B in-head mounting.
Moreover (by proper mounting kit) it is possible to mount the DAT 1075 on DIN rail.

 RTD and Thermocouple Temperature Transmitter DAT1075 has the following features:

  • Configurable input for RTD, mV, Tc, Resistance and Potentiometer
  • 4 ÷ 20 mA configurable output on current loop
  • Configurable by Personal Computer
  • High accuracy
  • EMC compliant – CE mark
  • Low profile
  • Suitable for DIN B in-head mounting
  • Option for DIN rail mounting in compliance with EN 50022 (DIN RAIL Option)

 

Input type for Datexel DAT1075

Input for this model is as follows:

  • Thermocouple: J, K, S, R, B, E, T, N
  • RTD: Pt100, Pt1000, Ni100, Ni1000
  • Voltage: mV
  • Potentiometer
  • RES. 2,3 wires
  • Current: mA


Output type

Output for this temperature transmitter is:

  • Direct Current: 4 mA … 20 mA
  • Reverse Current: 20 mA … 4 mA


Response time

The response time for this transmitter is about 400 ms.

Power supply

power supply voltage for Datexel 2015 is the standard 10 to 32 VDC. Also Reverse polarity protection is 60 VDC max.

Temperature & humidity Consideration

  • Operative temperature -20°C ... +70°C
  • Storage temperature -40°C ... +85°C
  • Humidity (not condensed) 0 ... 90 %

Housing

  • Material: Self-extinguish plastic
  • Mounting: DIN B head or bigger
  • Weight: about 20 g.
  • Dimensions: 43 mm; H = 17 mm

Industries/applications

  • Furnace
  • Oil and gas
  • Brick manufacturing
  • Heat Exchangers
  • Industrial Processes
  • Heating/cooling systems

 

Series Information

“DAT1000 SERIES”: temperature transmitters for DIN B in-head mounting

The transmitters of the DAT1000 series can accept at their input signals coming from 2,3 or 4 wires Pt100, thermocouple and potentiometer sensors or voltage signals (mV).The devices provide a 4÷20 mA two wire current loop output signal.
The series is composed of devices with input configurable by PC with or without galvanic isolation. Moreover, it is available a version of the transmitters of the DAT1000 series developed for the use in potentially explosive atmospheres certified in according to the DIRECTIVE ATEX 94/9/EC. (see p. 24 to 26).

  • DAT 1010: Two wire transmitter for RTD programmable by PC
  • DAT 1015: Two wire universal transmitter programmable by PC
  • DAT 1061: Isolated two wire Transmitter for RTD programmable by PC
  • DAT 1066: Isolated two wire universal transmitter programmable by PC

About Datexel:

Founded in 1992 from the commitment and aspiration of several partners as a small provincial company, through the years DATEXEL has become an established reality on Italian and international markets as a manufacturer of electronic equipment for industrial automation and control process.

The range of DATEXEL products includes: Transmitters, signal and temperature Converters (both analogue and digital), galvanic Isolators, signal Splitters, I/O Modules, Trip Amplifiers, Power Supply Units, current loop Isolators, analogue and digital Displays.


Datexel Products are used in following industries:

  • Steel production
  • Automotive
  • Oil and gas
  • Shipbuilding

 

View AllClose

Warranty Information

One-Year Warranty
View AllClose

Additional Information

Input type:
TC (J, k, S, R, B, E, T, N), RTD (PT100, PT1000, Ni100, Ni1000), Voltage (mV), Potentiometer, RES. 2,3 wires
Output type:
Direct current (4 ... 20 mA), Reverse current (20 ... 4 mA)
Response time (10÷ 90%):
about 400 ms
Power supply voltage:
10 .. 30 Vdc
Operative temperature:
-20°C .. +70°C
Storage temperature:
-40°C .. +85°C
Humidity (not condensed):
0 .. 90 %
Material:
Self-extinguish plastic
Mounting:
DIN B head or bigger
Weight:
about 20 g.
Dimensions:
43 mm ; H = 17 mm
View AllClose