null

DATEXEL Temperature Transmitter Device In-Head Mounting Temperature Transmitter DAT1015

Write a Review
SKU:
DAT1015
MPN:
DAT1015
Weight:
500.00 Grams
Minimum Purchase:
1 unit
Shipping:
Calculated at Checkout
$84.00

Description

DAT1015 from Datexel is an economical Thermocouple Head Mounted Temperature Transmitter. The input also accepts RTD's, mV's, Potentiometers and resistance Inputs. The DAT1015 "in head Mounted Temperature Transmitter" is PC Programmable. The sensor, range, zero and linearization are programmable with the Prodat software, available from DATEXEL. The input is measured, linearized and converted to the industrial standard of 4-20mA signal. The RTD and resistance input has the added feature of selecting 3 or 4 wire for higher accuracy. There is a burn out failure alarm that can be programmed to drive the output signal High and Low.

The input on the DAT1015 has a high range of tolerance and the DAT1015 can accept any a voltage between 10 V and 32 V. The power is Loop Powered 2 wire device. The thermocouple selection type is J, K, S, R, B, E, T and N. The RTD sensor is selectable for Pt100, Pt1000, Ni100 or Ni1000. The resistance input is selectable from 0-200, 0-500, 0-2000 Ohms. The mV input is selectable from -100mV to 700mV with a minimum span of 2 mV. The Potentiometer can accept resistance in the range of 0-200 Ohms, 200-500 Ohms and 0.5 to 2 k ohms.

The RTD and resistance can be 2 wire or use compensation wire to improve accuracy I.E. 3 or 4 wire. There is an option to program the burn out failure alarm on the 4-20mA signal to High (20mA) or Low (4mA). The power supply to the Temperature Transmitter has a high range of tolerance and can accept a voltage between 10 and 32 V. The DAT1015 Temperature-Transmitter is Loop Powered (2 Wire).

DAT1015 from Datexel comes with the following features:

  • Configurable input for RTD, TC, mV, Resistance, and Potentiometer.
  • Damping function on output.
  • 4 ÷ 20 mA configurable output on the current loop.
  • Configurable by Personal Computer.
  • High accuracy.
  • On-field reconfigurable.
  • Configurable by interface PRODAT05 or PRODAT06 without the power loop connected.
  • EMC compliant with CE mark.
  • Suitable for DIN B in-head mounting.
  • Option for DIN rail mounting in compliance with EN 50022 (DIN RAIL Option).

Brand Information

Datexel products are made to the very highest standards and all products carry the CE mark, and since March 2015 all slim-line products and DAT3000 modules carry the UL and CSA mark. Datexel obtained ISO 9001 in 1996 and now has the current standard UNI EN ISO 9001:2000 (issued in 2001). Datexel's signal conditioners also carry the ATEX 94/9/EC approval for safe environments. In July 2006, Datexel confirmed its products to the RoHS Directive Standard (2002/95/EC) which imposes restrictions on the use of dangerous substances for the manufacturing of electric and electronic equipment. Situated in Jupiter, Florida USA.

Data Sheet

To View Data Sheet Please Click Here
View AllClose

Warranty Information

One Year Warranty.
View AllClose

Additional Information

input:
none
Input signal type:
TC, RTD, Potentiometer, Voltage, Resistance.
Input calibration:
RTD > of ±0.1% f.s. or ±0.2°C. Low res. > of ±0.1% f.s. or ±0.15 Ω. High res. > of ±0.2% f.s. or ±1 Ω. TC, mV > of ±0.1% f.s. or ±18 uV.
Input impedance:
TC, mV >= 10 MΩ.
output:
none
Output type DC:
Min. 4mA. Max. 20mA.
Output type Reverse Current:
Min. 20mA. Max. 4mA.
Output calibration:
Current ± 7 uA.
Linearity:
TC ± 0.2 % f.s. RTD ± 0.1 % f.s.
Line resistance influence:
TC, mV <=0.8 uV/Ohm. RTD 3 wires 0.05%/Ω (50Ω balanced max.). RTD 4 wires 0.005%/ Ω (100Ω balanced max.).
RTD excitation current:
Typical 0.350 mA.
CJC comp.:
± 0.5°C.
Thermal drift:
Full scale ± 0.01% / °C. CJC ± 0.01% / °C.
Burnout values:
Max. output value about 20.5 mA. Min. output value about 3.8 mA. Max. fault value about 21.6 mA. Min. fault value about 3.5 mA.
Damping time constant:
Selectable from 0.3 to 30 s. Value 0: function not active.
Response time (10÷ 90%):
About 400 ms.
Power supply:
Power supply voltage 10…32 Vdc. Reverse polarity protection 60 Vdc max.
Isolation voltage:
Input – Power supply 1500 Vac, 50 Hz,1 min.
Temp. and humidity:
Operative temperature -40°C …+85°C. Storage temperature -40°C …+85°C. Humidity (not condensed) 0 …90 %.
Housing:
Material PC + ABS V0. Mounting DIN B head or bigger. Weight about 50 g. Dimensions Ø= 43 mm ; H = 24 mm
EMC (for industrial environments):
Immunity EN 61000-6-2. Emission EN 61000-6-4.
View AllClose