null
Datexel

Signal Converter Strain Gauge Input, Analog Output - DAT5025

(No reviews yet) Write a Review
SKU:
DAT5025
Weight:
0.50 Grams

Description

Datexel Signal Converter Strain Gauge Input, Analog Output - DAT5025

Isolated programmable converter for Strain Gauge / Bridge sensors, Highly Accurate

The converter DAT 5025 is designed to provide on its output a voltage or current signal linear and proportional with the output voltage coming from the output of a bridge transducers applied on its input.

The user can program the bridge excitation voltage value, the input and the output ranges by the proper DIP-switches available after opening the suitable door located on the side of device (see “Input ranges table” and “Output ranges table” sections).

The regulation of Zero and Span values is made by the ZERO and SPAN potentiometers located on the top of device.

The 2000 Vac isolation between input, power supply and output eliminates the effects of all ground loops eventually existing and allows the use of the converter in heavy environmental conditions found in industrial applications.

The DAT 5025 provides on the output side an auxiliary supply source to connect both active and passive loads.

It is housed in a plastic enclosure of 12.5 mm thickness suitable for DIN rail mounting in according to EN-50022 and EN-50035 standards.

The advantages and features for signal conditioner DAT5025:

  • Input for Strain Gauge
  • Input range configurable from 0÷10 mV up to 0÷200 mV or from ± 5 mV up to ± 200 mV
  • Accurate bridge excitation voltage at 3.6 and 10 Vdc with current limiter
  • Isolated power supply source for passive loads on output
  • Input and output ranges configurable by DIP-switches
  • Galvanic isolation at 2000 Vac between input, power supply and output
  • Good accuracy and performance stability
  • EMC compliant – CE mark
  • DIN rail mounting in compliance with EN-50022 and EN-50035

Input

  • Sensor type Strain Gauge
  • Input signal(configurable) From 0÷10 mV up to 0÷200 mV and from ± 5 mV up to ± 200 mV

Output

  • Signal type (configurable) Current: 4 ÷ 20 mA, 0 ÷ 20 mA,
  • Voltage: 0÷10 V, 2÷10 V, 0÷5 V, 1÷5 V

Performances

  • Calibration error ± 0.1 % of f.s.
  • Linearity error (*) ± 0.1 % of f.s.
  • Thermal drift 0.01 % of f.s./°C
  • Response time (from 10 to 90 % of f.s.) 40 ms
  • Power supply voltage (**) 18÷30 Vdc
  • Current consumption (***) Current output: 120 mA max.
  • Voltage output: 80 mA max.
  • Electromagnetic Compatibility (EMC)
  • (for industrial environment) Immunity: EN 61000-6-2; Emission: EN 61000-6-4
  • Isolation voltage 2000 Vac, 50 Hz, 1 min.
  • Operating temperature -20 ÷ 60 °C
  • Storage temperature - 40 ÷ 85 °C
  • Relative humidity (non cond.) 0 ÷ 90%
  • Maximum Altitude 2000 m
  • Installation Indoor
  • Category of installation II
  • Pollution Degree 2
  • Weight approx. 90 g

Mechanical Specifications

  • Material Self-extinguish plastic
  • IP Code IP20
  • Wiring wires with diameter 0.8÷2.1 mm2 /AWG 14-18
  • Tightening Torque 0.8 N m
  • Mounting in compliance with DIN rail standard EN-50022 and EN-50035

 

Series Information

“P.D.S. SERIES”: temperature and signal transmitters The P.D.S. (programmable by dip-switches) series transmitters and converters

can accept on their input signals coming from 2 or 3 wires Pt100. Thermocouple and Strain Gauge sensors or Voltage and Current signals.

  • Single and double channel 4÷20 mA two wires transmitters for Pt100 input without galvanic isolation (DAT2065, DAT2066)
  • 4÷20 mA two wires transmitter for Thermocouple input without galvanic isolation (DAT2045)
  • Single and double channel converters for Pt100 input with configurable output as voltage or current without galvanic isolation (DAT2165, DAT2166)
  • Isolated converter for Pt100 input with configurable output as voltage or current (DAT2061)
  • Converter for Thermocouple input with configurable output as voltage or current without galvanic isolation (DAT2145)
  • Isolated signal converters with configurable input and output as voltage or current (DAT5020. DAT5021, DAT5023I, DAT5023V)
  • Isolated signal splitter with configurable input and output as voltage or current (DAT5022)
  • Isolated signal converter for Strain Gauge input with configurable output as voltage or current (DAT5025) and converters for DIN rail mounting

About Datexel:

Founded in 1992 from the commitment and aspiration of several partners as a small provincial company, through the years DATEXEL has become an established reality on Italian and international markets as a manufacturer of electronic equipment for industrial automation and control process.

The range of DATEXEL products includes: Transmitters, signal and temperature Converters (both analogue and digital), galvanic Isolators, signal Splitters, I/O Modules, Trip Amplifiers, Power Supply Units, current loop Isolators, analogue and digital Displays.

Documents

To View Data Sheet for Datexel Signal Converter Strain Gauge Input, Analog Output - DAT5025 Please Click Here
View AllClose

Warranty Information

One Year Warranty
View AllClose

Additional Information

Input:
Strain Gauge
Output:
Current: 4 ÷ 20 mA, 0 ÷ 20 mA, Voltage: 0÷10 V, 2÷10 V, 0÷5 V, 1÷5 V
Power Supply:
18 to 32 Vdc. Reverse polarity protection 60 Vdc
Current Consumption:
Current output 35 mA max. Voltage output 25 mA max
Temperature rating:
Operative -4°F +158°F -20°C +70°C Temperature Storage Temperature -40°F +185°F -40°C +85°C
Humidity:
(non condensing) 0-90%
Housing:
Material self-extinguishing
Dimensions:
3 1/2" x 4 1/2 " x 1/2", 90 x 112x x 12.5 mm
Weight:
90 g
EMC:
For industrial environments. Immunity: EN 61000-6-2. Emission: EN 61000-6-4
Configuration::
PC Configurable and DIP Switch Configurable
View AllClose