null
Datexel

Signal Converter USB to RS485 Converter Isolated - DAT3580 USB 2W

(No reviews yet) Write a Review
SKU:
DAT3580USB-2W
Weight:
160.00 Grams
  • Signal Converter USB to RS485 Converter Isolated - DAT3580 USB 2W
  • Datexel Signal Converter USB to RS485 Converter Isolated - DAT3580 USB 2W

Description

Datexel Signal Converter USB to RS485 Converter Isolated - DAT3580 USB 2W

UL / CE mark, DC or AC power supply, Long Distance, Highly Accurate - Italian Made

The device DAT3580-USB is an isolated interface converter between USB port and asynchronous serial lines RS485 or RS422 that guarantees a full isolation between power supply, USB and serial line RS-485 or 422 removes eventual ground-loop effects, allowing the use of the device even in the heavy environmental conditions.

It is designed to operate either on serial interface RS-422 full-duplex 4 wires or RS485 half-duplex 2 wires, with a baud-rate transmission up to 115.2 Kbps.

The transmission is asynchronous without settings of protocol, data format and baud rate.

The DAT 3580-USB is in compliance with the Directive UL 61010-1 for US market and with the Directive CSA C22.2 No 61010-1 for the Canadian market.

The device is housed in a rough self-extinguishing plastic container which, thanks to its thin profile of 22.5 mm only, allows a high density mounting on EN50022 standard DIN rail.

The advantages and features for signal Converter DAT3580 USB 2W:

  • Asynchronous serial data transmission
  • Automatic baud-rate fitting up to 115.2 Kbps
  • Distance up to 1200 m
  • Point to point connection or multipoint connection up to 32 modules
  • DC or AC power supply
  • Galvanic isolation on all ways
  • USB cable on front side
  • UL / CE mark
  • Suitable for DIN rail mounting in compliance with EN-50022

 

Input signal Converter DAT3580 USB 2W

  • In compliance with standard USB 2.0, RS485 and RS422
  • RS485 Interface
  • Baud-rate up to 115.2 Kbps
  • Max. distance / baud-rate ratio 1.2 Km – 4000 ft @ 38400 bps

(recommended) (1) 2 Km – 6560 ft @ 19200 bps

3 Km – 9840 ft @ 9600 bps

4 Km – 13100 ft @ 4800 bps

5 Km – 16400 ft @ 2400 bps

7 Km – 23000 ft @ 1200 bps

  • Number of modules in multipoint up to 32
  • Switching time TX/RX (RS485) 150 us.
  • Internal terminator resistance (optional) 120 Ohm

POWER SUPPLY

  • Power supply DC voltage 10 .. 30 Vdc
  • Reverse polarity protection 60 Vdc max
  • Power supply AC voltage 9 ÷ 18 Vac (18 ÷ 30 Vac optional)
  • Current consumption 35 mA max.

Connection

  • USB USB connector type “A” (cable length ~ 1.8 mt. )
  • RS-485/422 removable screw terminals

ISOLATION

  • Power supply / USB 2000 Vac, 50 Hz, 1 min.
  • Power supply / RS485-422 2000 Vac, 50 Hz, 1 min.
  • USB / RS485-422 2000 Vac, 50 Hz, 1 min.

 

ENVIRONMENTAL CONDITIONS

  • Operative Temperature -20°C .. +60°C
  • UL Operative Temperature -10°C .. +40°C
  • Storage Temperature -40°C.. +85°C
  • Humidity (not condensed) 0 .. 90 %
  • Maximum Altitude 2000 m
  • Installation Indoor
  • Category of installation II
  • Pollution Degree 2

MECHANICAL SPECIFICATIONS

  • Material Self-extinguish plastic
  • IP Code IP20
  • Wiring wires with diameter 0.8÷2.1 mm2 /AWG 14-18
  • Tightening Torque 0.5 N m
  • Mounting in compliance with DIN rail standard EN-50022
  • Weight about 160 g.

CERTIFICATIONS

  • EMC ( for industrial environments) Immunity EN 61000-6-2
  • Emission EN 61000-6-4
  • UL US Standard UL 61010-1

 

“DAT3000 SERIES” data acquisition and control modules

The distributed I/O modules of the DAT3000 series represent a complete solution for the acquisition and control of the analog and digital I/O signals.

The series is composed of:

• Serial line converters and repeaters (DAT3580, DAT3580 USB, DAT3580 MBTCP, DAT3590).

• Modules for digital inputs and outputs (DAT3130, DAT3140, DAT3148/8, DAT3148/12, DAT3188/4, DAT3188/8).

• Modules for analog inputs (DAT3011, DAT3014, DAT3015, DAT3016, DAT3017, DAT3018, DAT3019).

• Modules with analog outputs (DAT3022, DAT3024, DAT3028).

The devices communicate on the RS-485 serial line by the MODBUS RTU communication protocol and are able to communicate with the host computer on multipoint net using only two wires.

About Datexel:

Founded in 1992 from the commitment and aspiration of several partners as a small provincial company, through the years DATEXEL has become an established reality on Italian and international markets as a manufacturer of electronic equipment for industrial automation and control process.

The range of DATEXEL products includes: Transmitters, signal and temperature Converters (both analogue and digital), galvanic Isolators, signal Splitters, I/O Modules, Trip Amplifiers, Power Supply Units, current loop Isolators, analogue and digital Displays.

 

Series Information

“DAT3000 SERIES” data acquisition and control modules

The distributed I/O modules of the DAT3000 series represent a complete solution for the acquisition and control of the analog and digital I/O signals.

The series is composed of:

• Serial line converters and repeaters (DAT3580, DAT3580 USB, DAT3580 MBTCP, DAT3590).

• Modules for digital inputs and outputs (DAT3130, DAT3140, DAT3148/8, DAT3148/12, DAT3188/4, DAT3188/8).

• Modules for analog inputs (DAT3011, DAT3014, DAT3015, DAT3016, DAT3017, DAT3018, DAT3019).

• Modules with analog outputs (DAT3022, DAT3024, DAT3028).

The devices communicate on the RS-485 serial line by the MODBUS RTU communication protocol and are able to communicate with the host computer on multipoint net using only two wires.

About Datexel:

Founded in 1992 from the commitment and aspiration of several partners as a small provincial company, through the years DATEXEL has become an established reality on Italian and international markets as a manufacturer of electronic equipment for industrial automation and control process.

The range of DATEXEL products includes: Transmitters, signal and temperature Converters (both analogue and digital), galvanic Isolators, signal Splitters, I/O Modules, Trip Amplifiers, Power Supply Units, current loop Isolators, analogue and digital Displays.

Documents

To View Data Sheet for Datexel Signal Converter USB to RS485 Converter Isolated - DAT3580 USB 2W Please Click Here
View AllClose

Warranty Information

One Year Warranty
View AllClose

Additional Information

Baud-rate:
up to 115.2 Kbps
Number of modules in multipoint:
up to 32
Operative temperature:
-1℉ to 140℉ -20℃ to 60℃
UL Operative temperature:
33℉ to 104℉ -10℃ to 40℃
Storage temperature:
-140℉ to 185℉ -40℃ to 85℃
Humidity:
(non condensing) 0-90%
Maximum Altitude:
6500ft 2000 m
Installation:
Inside
Category of installation:
II
Pollution Degree:
2
Housing::
Material self-extinguishing
IP Rating:
IP20
Wiring:
AWG 14-18/0.8÷2.1 mm2
Tightening Torque:
0.5 N m
Mounting:
DIN rail standard EN-50022
Dimensions:
W 4 L 5 H 3/4" 100 mm X 120 mm x 22mm
Weight:
160 g
View AllClose