null
Datexel

Isolated Module Modbus Datalogger to USB - DAT9011 USB-2.0

(No reviews yet) Write a Review
SKU:
DAT9011 USB-2.0
Weight:
190.00 Grams

Description

Datexel Isolated Module Modbus Datalogger to USB - DAT9011 USB-2.0

Multiple and digital inputs, Current Output, EMC compliance – CE mark, DIN rail mounting - High Quality

The device DAT9011USB-2.0 is an Intelligent unit able to control a network of slave Modbus RTU devices connected on serial line RS-485 Master or Modbus TCP through the Ethernet interface executing the reading and writing of the field values and performing the logical and mathematical functions necessary for the system working, managing up to 10 task of recording memorized on files saved on the USB device.

It is possible to get access to the saved files by means of the Ethernet connection. The device is equipped with one universal analogue input channel, one channel for Volt and mA input, two digital inputs with 32-bit pulse counters and 2 relay outputs.

On input an Auxiliary source is available to supply passive sensors on the field. By means of the Ethernet interface or the RS-485 “SLAVE” or uUSB ports it is possible to read and write, in real time, the internal registers value.

Moreover, by means of the Ethernet interface, or by the RS-485 “SLAVE” or uUSB ports it is possible to program the Control Logic, to monitor, to request data and programming in real time the Intelligent Unit, to program directly the Slave devices connected on the RS-485 Master and to request data from them.

The device DAT9011USB is configurable by the software DEV9K 2.0 and successive versions developed by DATEXEL and running under Windows. The LED of signaling of Ethernet activity and data Rx-Tx flow on the serial line allows a direct monitoring of the system functionality.

The connection is made by removable screw-terminals (supply and RS-485) and RJ45 plug (Ethernet). The device DAT9011USB realizes a full electrical isolation between the lines, introducing a valid protection against the effects of all ground loops eventually existing in industrial applications.

The device is housed in a rough self-extinguishing plastic enclosure which, thanks to its thin profile of 22.5 mm only, allows a high density mounting on EN-50022 standard DIN rail.

The advantages and features for Datexel Isolated Module DAT9011 USB-2.0

  • N°1 serial interface RS-485 Modbus RTU Master
  • N.1 serial interface RS-485/uUSB Modbus RTU Slave
  • N°1 Slot for USB memory stick
  • Interface Ethernet 10/100 Base-T, Modbus TCP Client/Server
  • N°1 universal analogue input + N°1 current and voltage analogue input
  • N°2 digital Inputs with 32-bit pulse counters + N°2 SPDT Relay Outputs
  • Auxiliary supply to power sensors on field
  • N°2 passive 4-20 mA analogue outputs
  • Master both on RS-485 (Modbus RTU) and on Ethernet (Modbus TCP)
  • Programming software with "flow chart" structure
  • Remotely programmable
  • Connection by removable screw-terminals
  • LED signaling for Link/Act Ethernet, serial RX-TX, power supply and digital inputs/outputs
  • Programmable without external sources via uUSB and CVPROG cable
  • Galvanic Isolation on all the ways
  • EMC compliance – CE mark
  • Suitable for DIN rail mounting in compliance with EN-50022 standard

Input for Datexel Isolated Module DAT9011 USB-2.0

  • Voltage
  • Thermocouple
  • RTD
  • Resistance
  • Potentiometer
  • Current

Digital Input

  • Number of Channels 2
  • Input voltage OFF State : 0÷3 V
  • (bipolar) ON State : 10÷30 V
  • Input Impedance 4.7 Kohm
  • N°2 Digital counter 32 bit (up to 5 kHz)

Output for Datexel Isolated Module DAT9011 USB-2.0

  • Current

Digital Output

  • N.2 Relays SPDT
  • Serial Ports RS-485 (Master & Slave)

In compliance with EIA 485

  • Protocol Modbus RTU
  • Baud Rate up to 115.2 kbps
  • Max. recommended distance (3) 1.2 km @ 115.2 kbps
  • Number of modules in multipoint 32 max.

Power Supply

  • Supply voltage 9 ÷ 30 Vdc
  • Current cons. @ 24 V 60 mA (170 mA max)
  • Current cons. @ 10 V 147 mA (300 mA max)
  • Polarity rev. protection 60 Vdc max.

Isolation

  • Input/ Output 1500 Vac, 50 Hz, 1min.

CONNECTIONS

  • Ethernet RJ-45 (on term. side)
  • uUSB micro-B (front)
  • RS-485 Master / Slave Screw term. 5.08mm
  • Relay Outputs Screw term 5.08mm
  • Supply/In/Analogue out Screw term. 3.81mm

Environmental Conditions

  • Operative Temperature -20°C .. +60°C
  • Storage Temperature -40°C.. +85°C
  • Humidity (not condensed) 0 .. 90 %
  • Maximum Altitude 2000 m
  • Installation Indoor
  • Category of installation II
  • Pollution Degree 2

Mechanical specifications

  • Material Self-extinguish plastic
  • IP Code IP20
  • Wiring wires with diameter 0.8÷2.1 mm2 /AWG 14-18
  • Tightening Torque 0.5 N m
  • Mounting in compliance with DIN rail standard EN-50022
  • Weight about 190 g

EMC ( for industrial environments )

  • Immunity EN 61000-6-2, Emission EN 61000-6-4

 

Series Information

About Datexel:

Founded in 1992 from the commitment and aspiration of several partners as a small provincial company, through the years DATEXEL has become an established reality on Italian and international markets as a manufacturer of electronic equipment for industrial automation and control process.

The range of DATEXEL products includes: Transmitters, signal and temperature Converters (both analogue and digital), galvanic Isolators, signal Splitters, I/O Modules, Trip Amplifiers, Power Supply Units, current loop Isolators, analogue and digital Displays.

Documents

To View Data Sheet for Datexel Isolated Module Modbus Datalogger to USB - DAT9011 USB-2.0 Please Click Here
View AllClose

Warranty Information

One Year Warranty
View AllClose

Additional Information

Input Channel 0:
mV -100 to 100mV, Volts -100mV to 10V, Current 4-20mA, 0-20mA. RTD Pt100, Pt 1000, Ni100, Ni1000. Resistance 0-2000, Ohm. Potentiometer 20-2000 Ohm. Thermocouple J,K,R,S,B,E,T, N
Input Channel 1:
mV -100 to 100mV. Volts -100mV to 10V. Current 4-20mA, 0-20mA
Digital Input:
4 Channels
Threshold:
0-3 Volts Off, 10-30V On
Frequency:
300 Hz Maximum
Output Channel 1 and 2:
Current 4-20mA
Channel 1 and 2:
2 Relays SPDT 2 Amp at 250 V
RS485:
Port 1 Modbus RTU Master, Port 0 Modbus RTU Slave
RS232:
Modbus RTU Slave
Ethernet:
Ethernet 10Base-T, Modbus TCP
Power Supply:
Voltage 10 - 30 Vdc. Reverse polarity protection 60 Vdc
Current Consumption:
80 mA max
Temperature rating:
Operative Temperature - 4°F +140°F -20°C +60°C Storage Temperature - 40°F +185°F -40°C +85°C
Humidity:
(none condensing) 0-90%
Housing::
Material self-extinguishing
Dimensions:
W x L x H 4 x 4 3/4 x 1inch, 100 x 120 x 22.5mm
Weight:
190 g
EMC:
Immunity EN 61000-6-2. Emission EN 61000-6-4.
Isolation::
1500Vac, 50Hz, 1 minute
Configuration:
PC Configurable with Ethernet
View AllClose