Datexel Ethernet Digital IO Module 8 Digital Inputs / 8 PNP Outputs DAT 8188

Programmable, PNP Output, Great Quality

The device DAT8188 is a Modbus TCP server unit with 8 digital input channels and 8 PNP outputs.

For the digital inputs are available up to 4 counters 32 bit with measure of frequency up to 300 Hz.

The Ethernet interface allows to read and write in real time the value of device's internal registers.

The built-in Web Server allows the remote visualization and acquisition of the digital inputs state, to drive the digital outputs and access to and configure the main Ethernet parameters via web browser.

The device is also configurable by the software Dev9K, a free IDE developed by DATEXEL.

The device realizes a full electrical isolation between the lines, introducing a valid protection against the effects of all ground loops eventually existing in industrial applications. The LEDs of signaling of Ethernet activity, input and output state and power supply allow a direct monitoring of the system functionality. The connection is made by removable screw-terminals (inputs, outputs and power supply) and RJ45 plug (Ethernet).

The device is housed in a rough self-extinguishing plastic enclosure which, thanks to its thin profile of 22.5 mm only, allows a high density mounting on EN-50022 standard DIN rail.

The features for DAT 8188:

• Interface Ethernet 10/100 Base-T, Modbus TCP Server
• N.8 Digital inputs
• N.8 PNP outputs
• Built-in Web server to acquire the digital inputs state and drive the digital outputs via web browser
• Remotely programmable
• Connection by removable screw-terminals
• LED signalling for Link/Act Ethernet, power supply
• LED signalling for digital inputs and outputs state
• Galvanic isolation on all the ways
• CE mark

DAT 8188 is in compliance with Ethernet IEEE 802.3

• Network: interface Ethernet 10/100Base-T
• Protocol: Modbus TCP
• Max. cable length: 100 meters
• Number of socket: up to 16

Digital Input for DAT 8188

• Channels 8
• Input voltage (bipolar)
• OFF state 0 ÷ 3 V
• ON state 10 ÷ 30 V
• Impedance 4.7 KW
• Sample time 5 ms
• Number of counters 4
• Counters register bit-length 32 bit
• Counters frequency up to 300 Hz
• Minimum pulse width 1 ms

Digital Output for DAT 8188 

• Channels 8
• Type PNP
• Voltage 10.5÷30 Vdc
• Max Load (*)
• per channel 500 mA
• per module 1 A
• Inductive Load 48 W – 2H max

POWER SUPPLY

• Power supply voltage 10 .. 30 Vdc
• Reverse polarity protection 60 Vdc max
• Consumption (operative) 220 mA max

ISOLATION

• Power Supply / Ethernet 1500 Vac, 50 Hz, 1 min
• Inputs / Power supply 1500 Vac, 50 Hz, 1 min
• Inputs / Ethernet 1500 Vac, 50 Hz, 1 min
• Input / Output 1500 Vac, 50 Hz, 1 min

ENVIRONMENTAL CONDITIONS

• Operative Temperature -10°C .. +60°C
• Storage Temperature -40°C .. +85°C
• Humidity (not condensed) 0 .. 90 %
• Maximum Altitude 2000 m
• Installation Indoor
• Category of installation II
• Pollution Degree 2

CONNECTIONS

• Ethernet RJ-45 (on terminals side)
• Inputs/Outputs/Power Supply Removable screw-terminals

MECHANICAL SPECIFICATIONS

• Material Self-extinguish plastic
• IP Code IP20
• Wiring wires with diameter 0.8÷2.1 mm2 /AWG 14-18
• Tightening Torque 0.5 N m
• Mounting in compliance with DIN rail
• standard EN-50022
• Weight about 160g

Industries/applications

• Furnace
• Oil and gas
• Brick manufacturing
• Heat Exchangers
• Industrial Processes
• Heating/cooling systems