null
Datexel

Modbus TCP Digital IO module Digital Output - DAT8130

(No reviews yet) Write a Review
SKU:
DAT 8130
Weight:
190.00 Grams

Description

Datexel Modbus TCP Digital IO module Digital Output - DAT8130

Digital Input, Digital Output, Highly Accurate

The device DAT8130 is a Modbus TCP server unit with 8 digital input channels and 4 relay outputs type SPDT.

For the digital inputs are available up to four 32 bit counters with measure of frequency up to 300 Hz.

The Ethernet interface allows to read and write in real time the value of device's internal registers.

The built-in Web Server allows the remote visualization and acquisition of the digital inputs state, to drive the relay outputs and access to and configure the main Ethernet parameters via web browser.

The device is also configurable by the software Dev9K, a free IDE developed by DATEXEL.

The device realizes a full electrical isolation between the lines, introducing a valid protection against the effects of all ground loops eventually existing in industrial applications.

The LEDs of signaling of Ethernet activity, input, output state and power supply allow a direct monitoring of the system functionality. The connection is made by removable screw-terminals (inputs, outputs and power supply) and RJ45 plug (Ethernet).

The device is housed in a rough self-extinguishing plastic enclosure which, thanks to its thin profile of 22.5 mm only, allows a high density mounting on EN-50022 standard DIN rail.

The advantages and features for signal conditioner DAT8130:

  • Interface Ethernet 10/100 Base-T, Modbus TCP Server
  • N.8 Digital inputs
  • N.4 Relay outputs (SPDT)
  • Built-in Web server to acquire the digital inputs state and drive the digital outputs via web browser
  • Remotely programmable
  • Connection by removable screw-terminals
  • LED signaling for Link/Act Ethernet, power supply
  • LED signaling for digital inputs and outputs state
  • Galvanic isolation on all the ways
  • CE mark
  • In compliance to EN-50022 DIN rail mounting

 

Input

  • DIGITAL INPUTS 8 Channels

Output

  • DIGITAL OUTPUTS 4 channels
  • Type: SPDT relay

Response time (10÷ 90%)

  • about 400 ms

POWER SUPPLY

  • Power supply voltage 10 .. 30 Vdc
  • Reverse polarity protection 60 Vdc max
  • Current Consumption 290 mA max

 

 

ENVIRONMENTAL CONDITIONS

  • Operative Temperature -10°C .. +60°C
  • Storage Temperature -40°C .. +85°C
  • Humidity (not condensed) 0 .. 90 %
  • Maximum Altitude 2000 m
  • Installation Indoor
  • Category of installation II
  • Pollution Degree 2

MECHANICAL SPECIFICATIONS

  • Material Self-extinguish plastic
  • IP Code IP20
  • Wiring wires with diameter 0.8÷2.1 mm2 /AWG 14-18
  • Tightening Torque 0.5 N m
  • Mounting in compliance with DIN rail standard EN-50022
  • Weight about 190 g

  

Series Information

Products designed by Datexel are made keeping all the standards in mind and all products carry the CE mark, and from March 2015 all Slimline products and DAT3000 modules are supposed to carry the UL and CSA mark. Datexel obtained ISO 9001 in 1996 and now has the current standard UNI EN ISO 9001:2000 (issued in 2001). Datexel's signal conditioners also carry the ATEX 94/9/EC approval for safety environments.

In July 2006, there was the conformation of products to the RoHs Directive Standard (2002/95/EC) which enforces restrictions on the use of unsafe substances for the engineering of electric and electronic equipment.

About Datexel:

Founded in 1992 from the commitment and aspiration of several partners as a small provincial company, through the years DATEXEL has become an established reality on Italian and international markets as a manufacturer of electronic equipment for industrial automation and control process.

The range of DATEXEL products includes: Transmitters, signal and temperature Converters (both analogue and digital), galvanic Isolators, signal Splitters, I/O Modules, Trip Amplifiers, Power Supply Units, current loop Isolators, analogue and digital Displays.

Documents

To View Data Sheet for Datexel Modbus TCP Digital IO module Digital Output - DAT8130 Please Click Here
View AllClose

Warranty Information

One Year Warranty
View AllClose

Additional Information

Input:
8 Channels
Output:
4 Relays SPDT
Ethernet 10/100T:
Modbus TCP
Power Supply:
10 - 30 Vdc. Reverse polarity protection 60 Vdc
Current Consumption:
290 mA max
Temperature rating:
Operative Temperature -4°F +140°F - 20°C +60°C Storage Temperature - 40°F +185°F - 40°C +85°C
Humidity:
(not condensing) 0-90%
Housing:
Material self-extinguishing
Dimensions:
W x H x T 4 3/4 x 4 x 7/8 inch, 120 x 100 x 22,5mm
Weight:
190 g
EMC:
Immunity: EN 61000-6-2, Emission: EN 61000-6-4
Configuration:
PC Configurable
View AllClose