null
Datexel

DAT5024E Temperature Transmitter

(No reviews yet) Write a Review
SKU:
DAT5024E
Weight:
100.00 Grams

Description

 

 

DAT5024-E1-General-Description

The DAT5024E1 is a mA Din Rail mount Limit Alarm. It can accept a mA or Voltage signal.

The inputs are selectable by the use of DIP Switches on the side of the DAT5024E1.

On the Current input there is an option to use the auxiliary power supply so both active and passive signals can be used.

The Threshold 1 is programmed as high alarm, while, by dip-switches, it is possible to set the Threshold 2 either as high or low alarm.

The trip level of each threshold can be adjusted by the potentiometers and checked by the test-points located on the front of the device. It is possible to adjust by potentiometers the values of the hysteresis level and delay time.

The isolation between input and power supply is 1500 Vac.

The isolation between input and the contacts of relays is 1000 Vac.

The isolations eliminate the effect of all ground loops eventually existing and allows the use of the converter in heavy environmental conditions found in industrial applications.

The DAT5024 E1 is in compliance with the standard 89/336/EEC on the Electromagnetic Compatibility.

It is housed in a plastic enclosure of 20.5 mm thickness suitable for DIN rail mounting in compliance with EN-50022 and EN-50035 standards.

DAT5024-E1 Features
Voltage or Current Input
DIP Switch Programmable
DAT5024-E1 signal input DAT5024-E1 signal output DAT5024-E1 power supply
4-20mA, 0-20mA, 0-10V, 2-10V 2 Relay SPDT. Power Supply Voltage 18-32VDC
0-5V, 1-5V.   Reverse polarity protection 60Vdc
DAT5024-E1 current consumption DAT5024-E1 configuration DAT5024-E1 isolation
120 mA DIP Switch Configurable Between Input/Output/Power Supply
    1500Vac, 50 Hz for 1 Minute
DAT5024-E1 emc DAT5024-E1 housing DAT5024-E1 temperature rating
For Industrial environments Material Self-extinguishing Operating Temperature -4°F +140°F
Immunity EN 61000-6-2 Dimensions W X L X H -20°C +60°C
Emission EN 6100-6-4 Inch 3 1/2 x 4 1/2 x 1/2 Storage Temperature -40°F +185°F
  mm 90 x 112x x 12.5 -40°C +85°C
  Weight 3 oz 90 g Humidity (not Condensing) 0-90%

Specifications

Input mA, V. See Data sheet for range.
Output: Relay 1 SPDT Relay.
Power Supply: 18 to 32 Vdc
Temperature rating: Operative- 4°F +158°F - 20°C +60°C
  Temperature Storage Temperature - 40°F +170°F - 40°C +85°C.
Humidity: (non condensing) 0-90%.
Housing: Material self-extinguishing.
Dimensions: Diameter 1 3/4 " Height 15/16 " 42 mm X 24mm
Weight: 3 oz 90 g.
EMC. For industrial environments.
  Immunity: EN 61000-6-2.
  Emission: EN 61000-6-4.

Drawings

Input  
Volts Positive N Negative P
mA Passive Positive O Negative P
mA Active Positive M Negative O
Power supply Positive +V Q Negative -V R
Output  
Relay 0 NC L, Com G, NO I.
View AllClose