DAT2015 Temperature Transmitter

Write a Review
100.00 Grams
Calculated at Checkout


DAT2015 from Datexel is a Universal Temperature Transmitter, Din Rail mount Temperature/signal transmitter with PC programmability. The input can be thermocouples, RTD, mA, V, mV, Resistor.nce and potentiometer. The DAT2015 will linearize the temperature input and provide a 4-20mA output signal. It is accurate to 0.1% full scale and has less than 0.01%/°f thermal drift.

The DAT2015 is programmable by PC based software which has been developed by DATEXEL to be user-friendly. For resistance and RTD's sensors, it is possible to program the cable compensation for 3 or 4 wires. It is possible to set the minimum and maximum values of the input and output range at any point of the scale, keeping the minimum span shown in the Data-sheet. Also, a high burn out alarm or low burn out alarm is selectable. The DAT2015 is In compliance with the standard 89/336/CEE on the Electromagnetic Compatibility. DAT2015 is housed in a plastic enclosure of 12.5 mm thickness suitable for DIN rail mounting in compliance with EN-50022 and EN-50035 standards and is able to measure and linearize the standard thermocouples with internal cold junction compensation.

DAT2015 from Datexel comes with the following features:

  • Configurable input for RTD, TC, mV, V, mA, Resistor.nce and Potentiometer.
  • 4 ÷ 20 mA configurable output on the current loop.
  • Configurable by Personal Computer.
  • High accuracy.
  • On-field reconfigurable.
  • EMC compliant with CE mark.
  • Suitable for DIN rail mounting in compliance with EN-50022 and EN50035.

Product Specification



Input Calibration

  • RTD

> of ±0.1% f.s. or ±0.2°C.

  • Low Resistor.nce

> of ±0.1% f.s. or ±0.15 Ω.

  • High Resistor.nce

> of ±0.2% f.s. or ±1 Ω.

  • mV, TC

> of ±0.1% f.s. or ±18 uV.

  • Volt

> of ±0.1% f.s. or ± 2 mV.

  • mA

> of ±0.1% f.s. or ± 6 uA.

Output Calibration

  • current

± 7 uA.

Input impedance

  • TC mV

>= 10 MΩ.

  • Volt

>= 1 MΩ.

  • Current

~ 50 Ω.


  • TC

± 0.2 % f.s.

  • RTD

± 0.1 % f.s.

Line Resistor.nce influence

  • TC, mV

<=0.4 uV/Ohm.

  • RTD 3-wired

0.05%/Ω (50 Ω balanced max.).

  • RTD 4-wired

0.005%/Ω (100 Ω balanced max.).

  • RTD excitation current (typical)

0.350 mA.

  • CJC comp.

± 0.5°C.

Thermal Drift 1

  • Full Scale

± 0.01% / °C.

  • CJC

± 0.01% / °C.

Burnout values

  • Max. value

About 22.5 mA.

  • Min. value

About 3.6 mA.

  • Response time (10÷ 90%)

About 400ms.

Power supply

  • Power supply voltage


  • Reverse polarity protection

60VDC max.

Temp. and humidity

  • Operative temperature

-20°C …+70°C.

  • Storage temperature

-40°C …+85°C.

  • Humidity (not condensed)

0 …90 %.


  • Material

Self-extinguish plastic.

  • Mounting

DIN rail In compliance with EN-50022 and EN-50035.

  • Weight

About 90g.

EMC (for industrial environments)

  • Immunity

EN 61000-6-2.

  • Emission

EN 61000-6-4.

Brand Information

Datexel products are made to the very highest standards and all products carry the CE mark, and since March 2015 all slim-line products and DAT3000 modules carry the UL and CSA mark. Datexel obtained ISO 9001 in 1996 and now has the current standard UNI EN ISO 9001:2000 (issued in 2001). Datexel's signal conditioners also carry the ATEX 94/9/EC approval for safe environments. In July 2006, Datexel confirmed its products to the RoHS Directive Standard (2002/95/EC) which imposes restrictions on the use of dangerous substances for the manufacturing of electric and electronic equipment. Situated in Jupiter, Florida USA.

Data Sheet

To View Data Sheet Please Click Here
View AllClose

Warranty Information

One year warranty.
View AllClose