Temperature Transmitters

The THD series temperature/humidity transducers have built-in temperature and humidity sensors and are capable of various outputs including DC 4-20 mA, 1-5 VDC, RS485 communication. The temperature sensors have a range of -19.9 to 60.0°C and the...

The THD series temperature/humidity transducers have built-in temperature and humidity sensors and are capable of various outputs including DC 4-20 mA, 1-5 VDC, RS485 communication. The temperature sensors have a range of -19.9 to 60.0°C and the...

DAT3014 from Datexel is a 4 channel RTD, Potentiometer and Resistor.nce input RS232 converter. The DAT3014 RS232 converts the RTD, Potentiometer and Resistor.nce analog signal to a 16-bit digital format. The data is transmitted by the RS232 ASCII...

DAT3015-I from Datexel is a 4 channel Current input Modbus converter. The DAT3015I converts the Current analog signal to a 16-bit digital format. The data is transmitted by the MODBUS RTU protocol on RS-485. The input Current on the DAT3015I is -20 to...

DAT3024 from Datexel is a 4 channel Current or Voltage output module. The DAT3024 converters RS232 into 4-20mA, 0-10V, 1-5V, 2-10V. The DAT3024 Current or Voltage output is Isolated from the Power supply, and the RS232. The Slew rate is adjustable. The...

DAT5023IAC/B from Datexel is designed to detect the TRMS value of the AC current signal from 0-20A, 0-25A and 0-30 A applied on its input, providing a voltage or current output signal. The user can program the input and output range by the DIP-switches...

DAT207A (2W) from Datexel is an mV, mA and Voltage Transmitter that converts a mV, mA, Voltage into a current output. There are 2 Voltage versions that range from 0-5mv to 0-20V and an mA input range from 0-5mA up to 50mA. The input from a sensor in...

DAT2015 from Datexel is a Universal Temperature Transmitter, Din Rail mount Temperature/signal transmitter with PC programmability. The input can be thermocouples, RTD, mA, V, mV, Resistor.nce and potentiometer. The DAT2015 will linearize the temperature...

DAT205 (3W) from Datexel is a Potentiometer converter with a Voltage or Current output. The DAT205 3W has a separate power supply, and the added feature of holding the output with the use of the selection terminal. The input from a...

DAT3580 (2W) from Datexel is an isolated converter from RS232 to RS485. It guarantees a full isolation between the power supply, serial line RS-232 and the RS-485 line. It is also available to convert RS232 to RS422. The Isolation removes ground-loop...

DAT3580 (2W) from Datexel is an isolated repeater between asynchronous serial lines RS485 that guarantees a full isolation between the power supply, and serial line, removing eventual ground-loop effects, allowing the use of the device even in heavy...

DAT4035 from Datexel is a DIN Rail mount signal transmitter with PC programmability. The input can be thermocouples, RTD, mA, V, mV, resistance and potentiometer. The DAT4035 will linearize the input and provide a 4-20mA output signal. It is accurate to...

DAT4135 from Datexel is a DIN Rail mount signal transmitter with PC programmability. The input is Universal and can be thermocouples, RTD, mA, V, mV, resistance and potentiometer. The DAT4135 will linearize the input and provide a 4-20mA or voltage...

DAT4135-SELfrom Datexel is a DIN Rail mount signal transmitter with PC programmability. The input is Universal and can be thermocouples, RTD, mA, V, mV, Resistor.nce and potentiometer. The DAT4135 will linearize the input and provide a 4-20mA or voltage...

DAT4531B from Datexel is an RTDTemperature converter and Isolated Resistor.nce converter that is a din rail mount Temperature converter. It is programmable by PC or DIP Switches. The DAT4531B accepts signal from various RTD's Pt100, Pt1000 Ni100,...

DAT5020 from Datexel is a Bipolar voltage Signal converter that can accept +/- 5V, +/-10V, mV, mA, Potentiometers and can converter these signals into an isolated +/- 5V, 10V, Voltage or Current output. The DAT5020 has a 3-way isolation between the...

DAT5021 from Datexel is a 3-way isolated signal converter that the input, output and power supply are all isolated from each other. The DAT5021 is a DIN Rail mount and DIP Switch programmable. The input options are 0-10V, 2-10V, 0-5V, 1-5V, 4-20mA and...

DAT5022 from Datexel is a low cost signal splitter and a 4 way isolated between the input, power supply, and the 2 outputs. The inputs and outputs can be 4-20mA, 0-20mA. 0-10V, 2-10V, 0-5V, 1-5V. The span and zero can be adjusted to provide offsets if...

DAT8050 from Datexel is a 4 Digit LED loop-powered indicator that accepts an input and a power supply from a 4-20 mA current loop signal, no external power supply is needed. The display can be adjusted to have a span between -1999 and 9999 points, the...

DAT1010 from Datexel is an RTD Head Mounted Temperature transmitter or sometimes called a Hockey puck Temperature Transmitter. It can accept signals from RTD's, mV, Resistance, and Potentiometer and convert the signal into a 4-20mA signal. The...