Signal Transmitters

The AC current converter DAT5023IAC A is created for the detection of terms value of the AC current signal from 0-5A, and 0-10A applied on its input, providing a voltage or current output signal. The measuring cable which carries the current is inserted...

The AC Current Transducer DAT5023IAC B is created to sense the TRMS value of the AC current signal from 0-20A, 0-25A and 0-30 A applied on its input, providing a voltage or current output signal. It allows the user to program the input and output ranges...

The AC Current Transducer DAT5023IAC D is created to sense the TRMS value of the AC current signal from 0÷40 A, 0÷50 A, 0÷60 A applied on its input, providing a voltage or current output signal. It allows the user to program the...

The DC current converter DAT5023Idc A is designed to convert 0-5A or 0-10 A into a current or Voltage signal. The output signal can be chosen from a 4-20mA, 0-20mA, 0-10V, 2-10V, 0-5 or 1-5V. There is option to program input and output ranges by the...

The DC converter DAT5023Idc B has been made to convert 0-20Amp, 0-25Amp, 0-30Amp into a current or Voltage signal. The output signal can be chosen from a 4-20mA, 0-20mA, 0-10V, 2-10V, 0-5 or 1-5V. The current carrying cable is given input through the...

The DC converter DAT5023Idc D has been made to convert 0...40A,  0...50A,  0...60A into a current or Voltage signal. The output signal can be chosen from a 4-20mA, 0-20mA, 0-10V, 2-10V, 0-5 or 1-5V. The current carrying cable is given input...

The DAT205 2 W is a Potentiometer Transmitter holds the ability to convert a Potentiometer input to 4-20mA Output. The input coming from a Potentiometer in the range of 0-1K Ohm to 0-10K Ohm gets transformed and designed to give an output of a 4-20mA...

The DAT205 3 W is a Potentiometer Transmitter that comes with a Voltage or Current output. This product offers a separate power supply and the added feature of holding the output which can be done by the use of the selection terminal. The input that...

The Dual Channel Voltage converter and Dual Channel Current converter DAT4532D acts as a 2 Channel din rail mount converter. The dual channel converter is created in a way that it would save both cost and space by being only half an inch thick. This...

The Mathematical Signal Conditioner DAT4632D acts as a signal conditioning din rail mount converter that can do mathematical functions and has two inputs and two outputs. The functions that can be performed are Sum, Difference, Multiplication, Division,...

The DAT5021 acts as 3 way isolated signal converter that the input, output and power supply are all kept inaccessible or isolated from each other. This product as a DIN Rail mount and allows for DIP Switch programmable. The input option are 0-10V, 2-10V,...

The Voltage Splitter and mA Splitter DAT4631D acts as a din rail mount converter and splitter. The DAT4631D performs conversions and linearization of the signal from any sensor providing a mA or Voltage signal and gives two process signal outputs either...

The Low-Cost Signal Splitter DAT5022 acts as a 4 way isolated between the input, power supply, and the 2 outputs. The inputs and outputs which are given can be be 4-20mA, 0-20mA. 0-10V, 2-10V, 0-5V, 1-5V. The span and zero allows to be adjusted for the...

The strain gauge converter DAT5025 has been created for the provision of the voltage or current output linear and proportional with the input voltage which comes from the output of a strain gauge or bridge transducer. The user is able to program the...

The Thermocouple Splitter and mV Splitter DAT4631A acts as a din rail mount converter and splitter. The DAT4631A performs the conversion and linearization of the signal from a thermocouple and gives 2 process signal outputs which could be either Voltage...

The RTD Splitter and Resistance Splitter DAT4631B acts as a din rail mount converter and splitter. The DAT4631B performs conversions and linearization of the signal from RTD's and gives two process signal outputs either Voltage or Current. The DAT4631B...

The Thermistor Splitter and Potentiometer Splitter DAT4631C acts as a din rail mount converter and splitter. The DAT4631C performs conversion and linearization of the signal from PTC and NTC type thermistors and gives two process signal outputs which can...

The DC voltage Transmitter DAT5023/V has been created for the measurement of the DC Voltage and convert it into a DC current or voltage output signal. The DIP switch permit Transducer to program the input and output ranges. The DIP-switches which are...