Temperature Transmitters of Datexel

Temperature Transmitters of Datexel

Datexel manufactures a large range of Temperature Transmitters for every application. There are both Head Mount Temperature Transmitters (Hockey Puck Temperature Transmitters) and Din Rail Mount Temperature Transmitters.

  • Head Mounted Temperature Transmitter

Head Mounted Temperature Transmitter Range of Low Cost Head Mounted Temperature Transmitter. PC Programmable, Isolated, ATEX approved.

  • DIN Rail Temperature Transmitter

Din Rail Temperature TransmitterDIP Switch & PC Programmable DIN Rail Temperature Transmitters. Isolated.

These devices have many options such as PC Programmable or DIP Switch Programmable, ATEX Intrinsically certified, Isolated and linearized.

The range of Datexel Temperature Transmitters includes features like direct and inverse outputs, High and Low sensor burn out, High speed response output and with the programming software you are able to run in measure mode and observe the input and output at the same time.

Below is a list of the various inputs from a range of Temperature Sensors and Temperature Probes.

Thermocouples J Type Thermocouples
K Type Thermocouples
S Type Thermocouples
R Type Thermocouples
B Type Thermocouples
E Type Thermocouples
T Type Thermocouples
N Type Thermocouples
Thermistors PTC
RTD 2,3,4 Wire Pt 100
Ni 100
Ni 1000
Voltage mV
Potentiometer Ohms
Resistance Ohms

Below is a list of the various outputs from the Datexel range of Temperature Transmitters.

Standard 4-20mA
Direct 0-20mA Minimum span 4mA
Inverse 20-0 mA Minimum span 4 mA
Direct 0-10V Min span 1V
Inverse 10-0V Min span 1 V


A Temperature Transmitter converts a signal from a temperature probe into a 2 wire 4-20mA output where as a Temperature Converter normally has a separate power supply and is also known as a 4 wire device. The output from a Temperature Converter can be current or voltage where as the Transmitter is only available with a 4-20mA output. The temperature probe is selectable from Thermocouples, Resistance Temperature Detectors (RTD's), mV, Resistance, and Potentiometers. Almost all of Datexel's head mounted devices are Transmitters but we have recently released the DAT1135 which is a Head Mounted Temperature Converter with a 10 V output and a minimum span of 1 V so the output is selectable between 0-1Vdc and

11th Jan 2016

Recent Posts