null
Autonics

Incremental Rotary Encoder 40mm, hollow shaft, 12mm inner shaft diameter - E40H12-1024-6-L-5

(No reviews yet) Write a Review
SKU:
E40H12-1024-6-L-5
MPN:
E40H12-1024-6-L-5
Weight:
100.00 Grams
Minimum Purchase:
1 unit

Description

 
 
 

The E40H series hollow shaft type incremental rotary encoders feature Ø40 mm size housings and can be easily installed in tight or limited spaces. The low moment of inertia of the shaft minimizes the effect on the rotation of applied equipment. The encoders are available in various control output options.

E40H12-1024-6-L-5 from Autonics is an incremental rotary encoder with 40mm hollow shaft, shaft inner diameter Ø12mm, resolution 1024, output phase A, B, Z and line driver control output with response freq. of 300KHz.

E40H12-1024-6-L-5 from Autonics comes with the following properties:

  • 12-24VDC power supply of line driver output (line-up).
  • Easy installation in tight or limited spaces.
  • Low shaft moment of inertia.
  • Hollow shaft type, Ø40 mm housing incremental rotary encoder.

Brand Information

“Autonics” is a leading provider of automation solutions from South Korea. They develop and manufacture a wide range of automation products that are marketed worldwide. Their core products include various sensors, controllers, and motion devices, measuring equipment, laser marking systems, connection equipment, and more. Autonics products are trusted and adopted by engineers in various industrial applications and their technology is widely applied in day-to-day automation devices.

With 12 international offices in South Korea, China, Japan, India, Vietnam, Indonesia, Malaysia, Russia, Turkey, USA, Brazil, Mexico, Autonics is able to provide comprehensive automation solutions for their customers across the globe.

Data Sheet

To View Data Sheet Please Click Here
View AllClose

Warranty Information

One Year Warranty
View AllClose

Additional Information

Resolution (P/R):
1,2,,5,10,12,15,20,23,25,30,35,40,45,50,60,75,100,120,150,192,200,240,250,256,300,360,400,500.512,600,800
,1000,1024,1200,1500,1800,2000,2048,2500,3000,3600,5000. (Not indicated resolution is customizable)
Output phase:
A, B, Z phase (line driver A,A’,B,B’,Z,Z’ phases)
Phase difference of output:
Phase difference between A and B: T/4 ± T/8 (T=1 cycle of A phase)
Totem pole output:
Low-Load current: max. 30mA, residual voltage max. 0.4VDC
High-Load current: max. 10mA, output voltage (power voltage 5VDC): min. (Power voltage 2VDC). Output voltage (power voltage 12-24VDC): min. (Power voltage 3VDC)
NPN open collector output:
Load current max. 30mA, residual voltage max. 0.4VDC
Voltage output:
Load current max. 10mA, residual voltage max. 0.4VDC
Line driver output:
Low-Load current: max. 20mA, residual voltage max. 0.5VDC
High-Load current: -20mA, output voltage (power voltage 5VDC): min. 2.5VDC. Output voltage (power voltage 12-24VDC): min. (Power voltage 3VDC)
Totem pole output , NPN open collector output , Voltage output:
Measuring condition- cable length: 2m I sink= 20mA
Line driver output:
Max. 0.5µs
Max. response freq:
300KHz
Power supply:
5VDC ±5% (ripple P-P: max 5%)
12-24VDC ±5% (ripple P-P: max 5%)
Current consumption:
Max. 80mA (disconnection of load), line driver output: max. 50mA (disconnection of load)
Insulation resistance:
Min. 100MΩ (at 500VDC megger between all terminals and cases)
Dielectric strength:
750VAC 50/60Hz for 1 min (between all terminal and cases)
Connection:
Cable type 250mm connector cable type
Starting torque:
Shaft type: max. 40gf/cm (0.004Nm). Hole type max. 50gf/cm (0.005Nm)
Moment of inertia:
Max. 40g/cm2 (4x10-6kg /m2)
Shafting load:
Radial: max. 2kgf, Thrust: max. 1kgf
Max. allowable revolution:
5000 RPM
Ambient temperature:
-10~+70â—¦C (at non-freezing status).
Storage temperature:
-25~+80â—¦C
Ambient humidity:
35~85 RH
Storage humidity:
35~90 RH
Vibration:
1.5mm amplitude at a frequency of 10~55Hz in each of X, Y, Z directions for 2 hours
Shock:
Approx. max. 50G
Protection:
IP50 (IEC standard). Option type is available for IP64 (IEC standard)
Cable:
Ø5, 5-wire, length 2m, shield cable (line driver output Ø5, 8-wire). (AWG 24, core diameter 0.08. number of cores 40, insulator out diameter Ø1
Accessory:
Shaft type Ø6mm coupling standard, Ø8mm coupling (sold separately). Hole type bracket
Unit weight:
Approx. 160g
View AllClose