null
Autonics

Digital Counter / Timer 6 digit, 1 Stage Setting - FX6M-1P4

(No reviews yet) Write a Review
SKU:
FX6M-1P4
MPN:
FX6M-1P4
Weight:
180.00 Grams
Minimum Purchase:
1 unit

Description

Autonics Programmable Digital Counters / Timers - FX6M-1P4

6-digit, DIN W 72 × H 72, 7-segment LED

 

The Autonics counter FX6M-1P4 is a counter and timer with 6-digit 7-segment LED, 1-stage setting, W 72 × H 72 mm, relay Contact control output and NPN open collector for Solid-state control output.

As a quick report, this counter provides:

  • Available to set 6 digits (0.1 sec to 99999.9 hr)
  • Method of operation:

              - Counter: Count up, Count down, Count up/down

              - Timer: Count up, Count down

  • Terminal block
  • Power supply: 100-240 VAC ~ 50/60 Hz
  • IP20 (front panel) ingress protection
  • 1-stage setting control output
  • SPDT (1c): 1 control output relay
  • NPN open collector control output: 1
  • Time operation: POWER ON START
  • Signal Input Method: Voltage input (PNP), No-voltage input (NPN)
  • Max. counting speed: 1, 30, 2k, 5k [cps]
  • Selectable Counter / Timer by DIP switch

Control output

POWER ON DELAY and FLICKER are the output operations for the FX6M-1P4.

Temperature

There are limitations in temperature and humidity in which FX6M-1P4 counter is used:

  • Storage temperature: -25 … 65°C
  • Storage humidity: 35 to 85%RH
  • Ambient temperature: -10 … 55°C
  • Ambient humidity: 35 to 85%RH

Environment resistance is rated at no freezing or condensation.

 

Click on the following link to view other Autonics counter products.

Series Information

FXM/FXH Series

Standard Digital Counter/Timers

The Autonics FXM/FXH series digital counter/timers integrate functions of both counters and timers. Counting speeds of 1 cps, 30 cps, 2 kcps, and 5 kcps are available and various time setting ranges are also available for the timer function. Count-up, count-down, and count up/down modes are available for accurate measurement and display of various system configurations. Users can easily switch between NPN/PNP inputs using the attached DIP switch. The FXM/FXH series is available in 4-digit, 6-digit, and 8-digit models in 2 standard DIN sizes (W 72 x H 72, W 48 x H 96 mm)

FXM/FXH Series Main features

  • Counting speeds: 1cps/30cps/2kcps/5kcps
  • Switch between counter and timer operation using DIP switch
  • No-voltage input (NPN) using DIP switch
  • Operation modes: count-up, count-down, count-up/down
  • Set decimal point, hr/min/sec display with RESET key

Counter

  • 20 input modes, 18 output modes

Timer Functions

  • Various output modes (16 output modes)
  • Various time setting ranges

    - 8-digit models: 0.01sec to 99999hr 59.9min

    - 6-digit models: 0.1sec to 99999.9hr

    - 4-digit models: 0.01sec to 9999hr

  • Output model types: single preset, dual preset, indicator only
  • Power supply: 100-240 VAC 50/60 Hz

About Autonics counter

"Autonics" is a leading provider of automation solutions from South Korea. Autonics products are trusted and adopted by engineers in various industrial applications and their technology is widely applied in day-to-day automation devices. This company represents 8 counter series:

  • CX Series: LCD Display Counter/Timers
  • LA8N Series: Compact 8-Digit LCD Digital Counters (Indicator Only)
  • CT Series: Programmable Digital Counter/Timers
  • FXY Series: Digital Counter/Timer Indicators (Indicator Only)
  • FXS Series: Compact Digital Counter/Timers
  • FXM/FXH Series: Standard Digital Counter/Timers
  • FS Series: 8-Pin Plug Type Digital Counters
  • FM Series: Digital Measure Counters

Autonics products are mainly used in:

  • Machine Tools Industry
  • Plastics/Rubber Industry

Documents

You may want to read this product's catalog. If so, please click to view the FX6M-1P4 datasheet.
View AllClose

Warranty Information

One Year Warranty
View AllClose

Additional Information

Digits:
4.
Digit size:
W4 x H8mm.
Power supply:
AC voltage type 100-240VAC 50/60Hz
Power supply:
AC/DC voltage type 12-24VAC 50/60Hz/12-24VDC (universal).
Allowable voltage range:
90 to 110% of voltage rated.
Power consumption:
AC voltage type *Indicator type: approx 6VA. *Single present: approx. 7VA. *Dual present: approx 8VA (240VAC 50/60 Hz).
Power consumption:
AC/DC voltage type *Indicator type: approx 5.8VA. *Single present: approx. 6.8VA. *Dual present: approx 7.6VA (240VAC 50/60 Hz). *Indicator type: approx 2.7W. *Single present: approx. 3.3W. *Dual present: approx 3.8W (24VDC).
Max. counting speed for CP1 and CP2:
Selectable 1cps/30 cps/2k cps/5k cps by internal DIP switch.
Min. input signal width:
Reset input Approx. 20ms.
Min. input signal width:
Inhibit input Approx. 20ms.
Input:
CP1, CP2 input (INHIBIT) Input logic is selectable. [Voltage input] input impedance is 5.4KΩ, ‘H’ level: 5-30VDC, ‘L’ level 0-2VDC. [No-voltage input] short-circuit impedance Max. 1kΩ, residual voltage, Max.2VDC. Open circuit impedance: min 100KΩ
Input:
RESET input Input logic is selectable. [Voltage input] input impedance is 5.4KΩ, ‘H’ level: 5-30VDC, ‘L’ level 0-2VDC. [No-voltage input] short-circuit impedance Max. 1kΩ, residual voltage, Max.2VDC. Open circuit impedance: min 100KΩ.
One-shot output:
Single present type: 0.05-5sec. Dual present type: 1st output 1 NPN open collector, 2nd output 1 NPN open collector.
Control output:
Without com. Contact output Dual preset: SPST (1a) 2EA. Single preset: SPDT (1c) 1EA.
Control output:
Solid-state output Dual preset: 1NPN open collector. Single preset: 1NPN open collector.
Control output:
Contact Type Single preset: SPDT (1c), Dual present type: 1st output SPDT (1c), 2nd output SPDT (1c).
Control output:
Contact Type Capacity 250VAC 3A at resistive load.
Control output:
Solid state Type Single preset: 1 NPN open collector. Dual preset: 1st out 1 NPN open collector, 2nd output 1 NPN open collector.
Control output:
Solid state Capacity 30VDC Max. 100mA max.
External sensor power:
12VDC ±10%, 50mA max.
Memory retention:
10 years (when using non-volatile semiconductor memory type).
Insulation resistance:
100MΩ (at 500VDC megger).
Dielectric strength:
2000VAC 50/60Hz for 1 min.
Noise strength:
AC power ±2KV the square wave noise (pulse width: 1µs) by the noise simulator.
Noise strength:
DC power ±500V the square wave noise (pulse width: 1µs) by the noise simulator.
Vibration:
Vibration Mechanical 0.75mm Amp. at freq. 0f 10-55Hz (for 1min.) in each X, Y, Z directions for 1 hour.
Vibration:
Malfunction 0.5mm Amp. at freq. 0f 10-55Hz (for 1min.) in each X, Y, Z directions for 10 min.
Shock:
Mechanical 300m/s2 (approx. 30G) in each X, Y, Z directions for 3 times.
Shock:
Malfunction 100m/s2 (approx. 10G) in each X, Y, Z directions for 3 times.
Relay life cycle:
Mechanical Min. 10,000,000 operations.
Relay life cycle:
Electrical Min. 100,000 operations.
Protection:
IP65 (front panel only).
Environment:
Ambient temp. -10~55â—¦C, storage -25~65â—¦C.
Environment:
Ambient humidity 35-85% HR, storage: 35-85% HR.
Relay lifecycle:
Mechanical Min. 10,000,000 operations.
Relay lifecycle:
electrical Min. 100,000 operations at 250VAC 2A (resistive load).
Approval:
CE.
Unit weight:
Approx. 395g.
View AllClose