TPK-04L Temperature probe

(No reviews yet) Write a Review
SKU:
TPK-04L
Weight:
500.00 Grams
Minimum Purchase:
1 unit
Shipping:
Calculated at Checkout
  • TPK-04L Temperature probe (TPK-04L)
  • TPK-04L Temperature probe (TPK-04L)
  • TPK-04L Temperature probe (TPK-04L)
  • TPK-04L Temperature probe (TPK-04L)
$81.00

Description

K Type Temperature Thermocouples

 
Product ID: TPK-04LS / TPK-04L

 

Specifications:
  • TPK-04LS 90 degree Short Angle Surface Probe
    • Measurement range: -50 ° C to 500 ° C.( -58 deg F to 932 ° F)
    • Diameter: 14 mm
    • Length : 185 mm (Stainless steel)
    • Hand Holder: 120 mm
    • Coiled Cable: 1500 mm
    • Short Angle Arm length: 25mm
  • TPK-04L 90 degree Long Angle Surface Probe
    • Measurement range: -50 ° C to 500 ° C.( -58 ° F to 932 ° F)
    • Diameter: 14 mm
    • Length : 185 mm (Stainless steel)
    • Hand Holder: 120 mm
    • Coiled Cable: 1500 mm
    • Long Angle Arm length : 63mm
  • Difference between TPK-04LS and TPK-04L
    • TPK-04LS :
    • Short Angle Arm length: 25mm
    • TPK-04L:
    • Long Angle Arm length : 63mm

 

 
It is not recommended to measure temperature over 250 deg C
continuously for this device, because thermocouples are easily
depleted at high temperatures.

 

Features:

How to use Surface temperature thermocouple correctly?

 

  1. The Objective surface should be kept clean, as a result of oil, dust, or other insulating material. For example,  paint will affect the measurement accuracy .
  2. Measured surface should be flat, For example,  the measured object is rough or uneven, you need to use grease ,smear on its surface.to get better heat transmitting. Rough surface tends to cause the thermocouple sensor damaged or poor performance of  the accuracy .
  3. Measurement of surface area must be greater than the size of a probe sensor.
  4. Prohibit using surface thermocouple for rolling objects. Suggest to use scroll wheel temperature measurements Tecpel TPK-06 Rolling thermocouple to measuring rolling objectives.
  5. Take the vertical angle of 90 ° degrees.  The error should not exceed 5 ° degree angle to ensure the accuracy of temperature measurement
  6. 6. Do not measure the temperature exceeds its rated temperature, to avoid the thermocouple from being damaged.
View AllClose

Warranty Information

One-Year Warranty
View AllClose