Multi function Temperature Controller SM-940

(No reviews yet) Write a Review
SKU:
SM-940
Condition:
New
Availability:
in stock
Weight:
400.00 Grams
Shipping:
Calculated at Checkout
$136.00

Description

Special feature:
  • Conveniently available program control(3Pattern 20segments program control)
  • RS485 transmission: Adoption of a computer communication function as a basic specification up to 1~255 ea, and free provision of a monitoring program(use of 20 ea) for demonstration
  • Multi Input : Thermocouple 5, Thermoscope resistor 1, DC voltage 2, Direct current 1, Sensor input of 14 kinds of humidity sensors, etc.
  • Power failure compensation function : In case of a power failure during program control, the value just before the power failure is memorized and operation is performed after recovery of the power failure.
  • Output current limitation: A function to limit the top/bottom of output current value
  • Slow Start: Protection of equipment by setting a current slow start to the device subject to damage of the equipment due to generation of excessive currents as soon as the power is turned ON when using a current output
  • Remote : Control of this product under the same condition as other products by receiving SV values from other products
  • 10 kinds of alarm functions
  • Manual current output : Outputting of currents continuously by designating an arbitrary currnet value
  • 10 kinds of alarms
  • Multi output : Electric current 2, Relay output  3, SSR output 1
View AllClose

Warranty Information

1 Year
View AllClose

Additional Information

Power Supply:
100~240AC(power range +10%)
Input:
Thermocouple : K, J, R, T, C Thermoscope resistor : DIN PT Direct currentElectric current , voltage : 4-20mA, 1-5V, 0-10V Humidity Sensor input
OUT1 | Main output:
A relay output · Contact capacity : 250V AC5A, 30V DC5A · Contact constituent : 1C · Control system : PID Control(setting up direction/inverse ), ON/OFF Control(setting up direction/inverse )
OUT2 | Auxiliary outputting based on alarms:
A relay output · Contact capacity : 250V AC2A, 30V DC2A · Contact composition : 1A · Control method : ON/OFF control(setting up direction/inverse,Operated separately from OUT1) · 10 kinds of alarm outputs
OUT3 | Auxiliary outputting based on alarms:
A relay output    · Same as OUT2
OUT4 | Electric current Main output:
SSR OUT Electric current output   · DC4-20mA Electric current , 1~5V Power control(setting up direction/inverse, Solw start, with a built in limit function of output upper and lower ) Transmission output    · DC4-20mA transmission output
Electric current output :
DC4-20mA Electric current, 1~5V Power control (setting up direction/inverse, Solw start, with a built in limit function of output upper and lower )
Transmission output:
DC4-20mA transmission output(SV transmission output, PV transmission output)
COPY control:
Controlled in the same way as the current control of output 4
View AllClose