DAT1010ISHT Temperature Transmitter
- 500.00 Grams
- Minimum Purchase:
- 1 unit
- Calculated at Checkout
The High Temperature IS Certified Hockey Puck Temperature Transmitter DAT1010ISHT is an RTD Head Mounted Temperature Transmitter. The input can accept mV's, Potentiometers and resistance Inputs. The DAT1010ISHT "in head Mount Temperature Transmitter" is PC Programmable. The sensor, range, zero and linearization, is programmable with the Prodat software, available from DATEXEL. The input is measured, linearized and converted to the industrial standard of 4-20mA signal. The RTD and resistance input has the added feature of selecting 3 or 4 wire for higher accuracy. There is a burn out failure alarm that can be programmed to drive the output signal High and Low. The input on the DAT1010ISHT has a high range of tolerance and the DAT1010ISHT can accept any voltage between 11 V and 30 Volt. The power is Loop Powered.
The DAT1010ISHT is accurate to 0.1% full scale mV Linear and has less than 0.02%/°f thermal drift.
The DAT1010ISHT is in compliance with the standard 89/336/CEE on the Electromagnetic Compatibility.
The DAT1010ISHT is housed in a self-extinguish plastic enclosure suitable for DIN B in-head mounting.
There is a mounting kit available to mount the DAT1010ISHT on DIN rail.